負壓氣力輸送系統（也稱負壓風送系統或負壓風運輸送系統）是高壓離心風機產生的真空將散裝粉粒體物料用負壓氣流吸送到指定的容器（料倉），負壓吸送式氣力輸送裝置為核心組成的真空負壓收集系統，特別適用于短距離、物料溫度高、多點卸料的系統中。

The negative pressure pneumatic conveying system (also known as the negative pressure air conveying system or negative pressure air conveying system) is a vacuum generated by a high-pressure centrifugal fan that sucks bulk powder materials into a designated container (silo) using negative pressure airflow. The negative pressure suction pneumatic conveying device is the core component of the vacuum negative pressure collection system, especially suitable for short distance, high material temperature, and multi-point unloading systems.

負壓吸送氣力輸送設備散裝物料抽吸機由吸嘴、液壓吸臂、分離卸料裝置、鼓風機(真空泵)、電控系統等組成。可直接或通過輸送機械將物料送入散裝物料庫(倉)。散裝物料氣力輸送系統由負壓氣力輸送設備(吸嘴、液壓吸臂、分離裝置、鼓風機或真空泵)和正壓氣力輸送設備(倉式泵、組合泵、空氣壓縮機)以及電控系統組成。

The negative pressure suction pneumatic conveying equipment for bulk material suction is composed of a suction nozzle, a hydraulic suction arm, a separation and unloading device, a blower (vacuum pump), an electrical control system, etc. Materials can be directly or through conveying machinery into bulk material warehouses (silos). The bulk material pneumatic conveying system consists of negative pressure pneumatic conveying equipment (suction nozzle, hydraulic suction arm, separation device, blower or vacuum pump) and positive pressure pneumatic conveying equipment (bin pump, combination pump, air compressor) as well as an electrical control system.

負壓吸送式氣力輸送原理

The principle of negative pressure suction pneumatic conveying

負壓吸送式氣力輸送的流化倉是利用空氣使粉煤灰顆粒能夠充分地形成流態化狀態，從而使粉煤灰能夠順利地進入負壓吸灰正壓輸送管道。負壓吸灰流化倉內部是由兩塊多孔薄鋼板組成的，在上下多孔板之間夾有透氣層。整個流化倉內部的多孔板按一定斜度（4%-10%）布置。粉煤灰由分離器進入組合泵，由組合泵進入流化倉，加料設備加入上殼體的加料口的透氣層上。空氣由流化倉進入入下殼體，并沿流化倉透過透氣層，使粉煤灰流態化。進入輸送機械送出或進入正壓輸送設備內，由空氣壓縮機或羅茨風機產生的正壓，經過送料管道，將物料送入散裝物料庫(倉)。而清潔的空氣則由分離器上部排出經排風管道，從羅茨鼓風機(真空泵)排氣口排入大氣。

The fluidized bin of negative pressure suction pneumatic conveying utilizes air to fully form a fluidized state of fly ash particles, so that fly ash can smoothly enter the negative pressure suction positive pressure conveying pipeline. The interior of the negative pressure ash suction fluidized bed is composed of two porous thin steel plates, with a breathable layer sandwiched between the upper and lower porous plates. The porous plates inside the entire fluidized bed are arranged at a certain slope (4% -10%). The fly ash enters the combined pump through the separator, and then enters the fluidized bin through the combined pump. The feeding equipment is added to the breathable layer of the feeding port of the upper shell. The air enters the lower shell through the fluidized bed and passes through the breathable layer along the fluidized bed to fluidize the fly ash. The positive pressure generated by the air compressor or Roots blower enters the conveying machinery to deliver or enter the positive pressure conveying equipment. Through the feeding pipeline, the material is sent to the bulk material warehouse (warehouse). And clean air is discharged from the upper part of the separator through the exhaust duct, and is discharged into the atmosphere through the exhaust port of the Roots blower (vacuum pump).

吸送式氣力輸送設備組成：

Composition of suction pneumatic conveying equipment:

負壓吸送裝置的主要組成部件為分離器，吸嘴（分固定式吸嘴和可移動式吸嘴），卸料器，真空泵，閥門及管件，控制系統等，適用于粉狀物料的中短距離輸送。由于輸送過程全部是在密閉的負壓管道中完成，所以在輸送線路上不會產生任何泄漏和污染，尤其適用于有嚴格泄漏污染要求的有害物質的輸送。輸送系統既可以單點供料，也可以多點供料，工藝布置靈活方便。

The main components of the negative pressure suction device are the separator, suction nozzle (divided into fixed suction nozzle and movable suction nozzle), unloader, vacuum pump, valve and pipe fittings, control system, etc., suitable for medium and short distance transportation of powdered materials. Due to the fact that the entire transportation process is completed in a closed negative pressure pipeline, there will be no leakage or pollution on the transportation line, especially suitable for the transportation of harmful substances with strict leakage and pollution requirements. The conveying system can provide both single point and multi-point feeding, with flexible and convenient process layout.

負壓吸送式氣力輸送裝置系統優勢：

Advantages of negative pressure suction pneumatic conveying device system:

輸送管道中壓力低于環境壓力，粉塵不向外泄漏，是輸送有毒性物料的最佳選擇，常用于卸船、真空上料、清潔等應用。適合多點到一點的輸送。輸送線路為負壓管路狀態，輸送過程中無泄漏，無污染；輸送狀態為均勻連續，輸送量可以調節；氣源裝置采用干式負壓氣源，簡單可靠；分離裝置采用高效過濾材料和脈沖噴吹，結構緊湊，分離效率高；吸嘴裝置可根據不同的應用場合和工藝要求進行專門設計；輸送系統的設備配置簡單，系統投資小；系統維護量低，檢修方便。

The pressure in the conveying pipeline is lower than the environmental pressure, and dust does not leak out. It is the best choice for transporting toxic materials and is commonly used in applications such as unloading ships, vacuum loading, and cleaning. Suitable for conveying from multiple points to one point. The conveying line is in a negative pressure pipeline state, and there is no leakage or pollution during the conveying process; The conveying state is uniform and continuous, and the conveying amount can be adjusted; The air source device adopts a dry negative pressure air source, which is simple and reliable; The separation device adopts high-efficiency filtering materials and pulse injection, with a compact structure and high separation efficiency; The suction nozzle device can be specially designed according to different application scenarios and process requirements; The equipment configuration of the conveying system is simple, and the system investment is small; Low system maintenance and convenient maintenance.

以上的文章由濟南鑫魯泉盛機械設備有限公司負壓氣力輸送提供分享，更多內容請關注我們：http://aesw.org.cn

The above article is shared by Jinan Xinlu Quansheng Machinery Equipment Co., Ltd. for negative pressure pneumatic conveying. For more content, please follow us: http://aesw.org.cn